Healing the iPhone's wounds

Public release date: 10-Jan-2012
[ | E-mail | Share ]

Contact: B. Rose Huber
rhuber@pealcenter.org
412-624-4356
University of Pittsburgh

Pitt researchers propose 'repair-and-go' method for small-scale cracks on digital device surfaces

PITTSBURGH -- Like the human body, a digital device often suffers a few bruises and scratches within a lifetime. As in medicine, these injuries can be easily detected and repaired (or healed). At other times, however, a digital device may sustain hard-to-pinpoint nanoscale scratches, which can cause the device as a whole to malfunction.

In a paper published today, Jan. 10, in Nature Nanotechnology, a team of researchers from the University of Pittsburgh and the University of Massachusetts Amherst (UMass) propose a "repair-and-go" approach to fixing malfunctions caused by small-surface cracks on any digital device or part before it hits store shelves.

"Anything that's a machine with a surface is affected by these small-scale cracks," said Anna Balazs, Distinguished Professor of Chemical and Petroleum Engineering in Pitt's Swanson School of Engineering and coinvestigator on the project. "These are surfaces that play a role in almost anything, especially functionality."

The Pitt-UMass research team approach was inspired by the ability of white blood cells in the body to heal wounds on-site. Balazs and Pitt colleagues first came up with a theoretical "repair-and-go" method: A flexible microcapsule filled with a solution of nanoparticles would be applied to a damaged surface; it would then repair defects by releasing nanoparticles into them. Using nanoparticles and droplets of oil stabilized with a polymer surfactantcompounds that lower the surface tension of a liquidthe UMass team actualized the theory, showing that these microcapsules found the cracks and delivered the nanoparticle contents into them. Balazs proposes that manufacturers use this method as a last step in the building process.

"The repair-and-go method can extend the lifetime of any system or device," she said. "Additionally, it could be used as a repair method after a crack has been found."

###

Original research by Balazs and her team was published in ACS Nano and then reported on in Nature Nanotechnology's "News and Views" section in September 2010. To read more about the healing process of devices, visit http://www.nature.com/nnano/journal/v5/n4/abs/nnano.2010.66.html.

To read the paper published today, visit http://www.nature.com/nnano.

1/10/11/amm/lks/jdh

---

[ | E-mail | Share ]

?

AAAS and EurekAlert! are not responsible for the accuracy of news releases posted to EurekAlert! by contributing institutions or for the use of any information through the EurekAlert! system.

Public release date: 10-Jan-2012
[ | E-mail | Share ]

Contact: B. Rose Huber
rhuber@pealcenter.org
412-624-4356
University of Pittsburgh

Pitt researchers propose 'repair-and-go' method for small-scale cracks on digital device surfaces

PITTSBURGH -- Like the human body, a digital device often suffers a few bruises and scratches within a lifetime. As in medicine, these injuries can be easily detected and repaired (or healed). At other times, however, a digital device may sustain hard-to-pinpoint nanoscale scratches, which can cause the device as a whole to malfunction.

In a paper published today, Jan. 10, in Nature Nanotechnology, a team of researchers from the University of Pittsburgh and the University of Massachusetts Amherst (UMass) propose a "repair-and-go" approach to fixing malfunctions caused by small-surface cracks on any digital device or part before it hits store shelves.

"Anything that's a machine with a surface is affected by these small-scale cracks," said Anna Balazs, Distinguished Professor of Chemical and Petroleum Engineering in Pitt's Swanson School of Engineering and coinvestigator on the project. "These are surfaces that play a role in almost anything, especially functionality."

The Pitt-UMass research team approach was inspired by the ability of white blood cells in the body to heal wounds on-site. Balazs and Pitt colleagues first came up with a theoretical "repair-and-go" method: A flexible microcapsule filled with a solution of nanoparticles would be applied to a damaged surface; it would then repair defects by releasing nanoparticles into them. Using nanoparticles and droplets of oil stabilized with a polymer surfactantcompounds that lower the surface tension of a liquidthe UMass team actualized the theory, showing that these microcapsules found the cracks and delivered the nanoparticle contents into them. Balazs proposes that manufacturers use this method as a last step in the building process.

"The repair-and-go method can extend the lifetime of any system or device," she said. "Additionally, it could be used as a repair method after a crack has been found."

###

Original research by Balazs and her team was published in ACS Nano and then reported on in Nature Nanotechnology's "News and Views" section in September 2010. To read more about the healing process of devices, visit http://www.nature.com/nnano/journal/v5/n4/abs/nnano.2010.66.html.

To read the paper published today, visit http://www.nature.com/nnano.

1/10/11/amm/lks/jdh

---

[ | E-mail | Share ]

?

AAAS and EurekAlert! are not responsible for the accuracy of news releases posted to EurekAlert! by contributing institutions or for the use of any information through the EurekAlert! system.

Source: http://www.eurekalert.org/pub_releases/2012-01/uop-hti011012.php

pepper spraying cop pepper spraying cop somaya reece padma lakshmi juelz santana juelz santana greg halman